Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 3
1
#4 BOLT M6*15
Step 3:
At the front of the chair, fasten the legs (#2 and #3) to the
cross brace on the seat/back assembly (#1) by using bolts
(#4). Keep the bolts loose. See Figure 3.
Note:
The labels marked "L" and "R" on the legs (#2 and #3) should
coincide with Figure 3 to ensure proper assembly.
FIGURE 5
6
Step 5:
At the back of the chair, fasten the seat/back assembly (#1)
to the legs (#2 and #3) by using bolts (#6). See Figure 5.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, Dry frame completely. Do not use bleach, acid, or
other solvents on the fabric or frame parts.
• The chair fabric may be washed on the surface only by using mild soap and water if necessary. Commercial foaming
upholstery cleaner may also be used.
• We recommend the use of furniture covers to protect your chair when not in use.
• Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off
season periods.
Warranty
• This product is covered by Courtyard Creations Inc. 3 years limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
whether they are missing or damaged,
V-3
R
3
2
L
1
3
2
35
#6 BOLT M6*35
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
STOP!
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
Missing A Part?
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
No Need To Go Back To
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
The Store
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
does not stock parts for this item.
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
If you need parts,
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
Call Toll Free:
TEL: 1-877-539-7436
1-MODEL NUMBER OF THE PRODUCT.
FAX: 1-877-539-7439
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
LIST.
For further assistance,
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
please visit us at
PRODUCT TO THE RETAILER.
service.cci@polywares.com
DON'T RETURN TO STORE!
STOP
FIGURE 4
1
4
15
Step 4:
At the front of the chair, fasten the legs (#2 and #3) to the
cross brace on the seat/back assembly (#1) by using bolts
(#5). Keep the bolts loose. See Figure 4.
FIGURE 6
Step 6:
Tighten the bolts on the seat assembly (#1). After all of the
bolts have been tightened completely. See Figure 6.
PAGE 2 OF 2
3
5
2
#5 BOLT M6*14
14
1
Publicidad
