Garden Treasures SD10-0952B Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Insert inner hex bolt (AA) to connect upper
leg assembly (B) into lower leg assembly (C)
as shown. Be sure to adjust both legs so that
pre-drilled holes are perfectly aligned. Loosely
tighten bolt (AA) using hex key wrench (FF).
Hardware Used
M8 x 12 mm
AA
Inner Hex Bolt
Hex Key Wrench
FF
2. Position table top (A) upside down on a
padded, non-abrasive surface. Position and attach
leg assembly (B & C) to table top (A) using
flat washer (BB), spring washer (CC) and ball
head nut (DD). Tighten all ball head nuts with the
wrench (EE).
Hardware Used
M8 Flat Washer
BB
M8 Spring Washer
CC
M8 Ball
DD
Head Nut
M8 Wrench
EE
Once all nuts are tightened, securely tighten the
bolt (AA) at center column of the leg assembly using
hex key wrench (FF). Carefully turn table upright.
1
x 1
DD
2
C
x 4
x 4
x 4
Lowes.com/gardentreasures
4
B
AA
B
DD
A
C
FF
BB
CC