Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Hold S3 more than two seconds to enter the alarm
time setting mode.
2. Depress S3 once to enter the time setting mode.
3. Seconds start flashing. All the dashes are on and the
third dash is flashing to indicate time setting mode.
Depress S2 to reset the second to zero. If the seconds
are 30+, one minute is added to the minute display,
and if less than 30, the minute is not changed.
4. Depress S1, minutes start flashing. Depress S2 to
advance it. (Fast advance by holding down S2 for
more than two seconds).
5. Depress S1, hour starts flashing. Advance it as above.
6. Depress S1, month starts flashing. Advance it as above.
7.
Depress S1, date starts flashing. Advance it as above.
8. Depress S1, day starts flashing. Advance it as above.
9. Depress S3 to resume the normal mode.
NOTE: The setting mode is returned to normal
mode at any time by depressing S3.
ALARM TIME SETTING
1.
Hold S3 more than two seconds to enter the alarm
time setting mode.
2. Hour starts flashing. All dashes are on and the
second dash is flashing to indicate alarm time
setting mode. Depress S2 to advance it (fast
advance by holding down S2 for more than two
seconds).
3. Depress S1 minutes start flashing. Depress S2 to
advance it.
4. Depress S3 to resume the normal mode.
STOPWATCH OPERATION
1.
In the stopwatch mode, depress S1 to start or stop
the stopwatch. When the stopwatch is stopped, the
STP dash will flash.
2. Depress S2 while the stopwatch is counting to obtain
LAP mode (LAP dash is flashing). The time is frozen on
the display with the stopwatch still counting.
3. To return the actual stopwatch time to the screen,
depress S2 again.
4. Depress S1 to stop the stopwatch.
5. Depress S2 while the stopwatch is stopped to reset
the stopwatch to zero.
PAGE 2 OF 6
OPERATION CONTINUED
6. Depress S3 to resume the normal mode.
1-800-295-5510
uline.com
NOTE: The stopwatch mode is returned to the
normal mode at any time by depressing S3.
0721 IH-5670
Publicidad
