Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 3
1
#4 BOLT M6*15
Step 3:
At the front of the chair, fasten the legs (#2 and #3) to the cross
brace on the seat/back assembly (#1) by using bolts (#4).
See Figure 3.
Note:
The labels marked "L" and "R" on the legs (#2 and #3) should
coincide with Figure 3 to ensure proper assembly.
FIGURE 5
6
#6 BOLT M6*35
Step 5:
At the back of the chair, fasten the seat/back assembly (#1)
to the legs (#2 and #3) by using bolts (#6).
of the bolts have been tightened completely.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents
on the frame parts.
• Cushions may be washed on the surface only by using mild soap and water or commercial foaming upholstery cleaner if
necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off
season periods.
Warranty
• This product is covered by Courtyard
Creations Inc. 3 years limited warranty.
• Proof of purchase (dated register receipt)
is required for warranty claims.
• It remains the customer's responsibility for
freight and packing charges to and from the
service center.
V-3
3
R
4
2
L
15
1
2
3
35
Make sure that all
See Figure 5.
Missing A Part?
No Need To Go Back To
The store where you made your purchase
does not stock parts for this item.
whether they are missing or damaged,
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
service.cci@polywares.com
DON'T RETURN TO STORE!
STOP
PAGE 2 OF 2
FIGURE 4
1
Step 4:
At the front of the chair, fasten the legs (#2 and #3) to the
cross brace on the seat/back assembly (#1) by using bolts
(#5). See Figure 4.
FIGURE 6
Step 6:
Turn the chair to its upright position. See Figure 6.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
STOP!
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
The Store
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
If you need parts,
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
Call Toll Free:
TEL: 1-877-539-7436
1-MODEL NUMBER OF THE PRODUCT.
FAX: 1-877-539-7439
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
For further assistance,
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
please visit us at
PRODUCT TO THE RETAILER.
3
2
5
#5 BOLT M6*14
14
Publicidad
