Kohler K-1169 Diagrama De Instalación página 2

Roughing-In
11-3/4"
(29.8cm)
33" (83.8cm)
1-1/2" O.D.
Product Information
Drop-in bath
Fixture*: basin area
Bathing well 42" (106.7cm) x
27" (68.6cm)
water depth
To overflow 16" (40.6cm)
* Approximate measurements for comparison only.
B
1024307-1-
K-1169
5-1/4" (13.3cm)
66" (167.6cm)
3" (7.6cm)
1-1/16" (2.7cm)
K-1169 shown
top area weight
54" (137.2cm) x 80 lbs.
30" (76.2cm) (36.3kg)
capacity
81 gal. (306.6L)
No change in measurements if connected with drain illustrated.
(K-7161-AF or K-7161M-AF)
Drop-in cut-out 64-1/2" (163.8cm) x 40-1/2" (102.9cm)
20-1/8" 22"
(51.1cm) (55.9cm)
Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 1350 lbs
(612.3kg).
Hot water supply should be 70% of capacity or greater. Installations
will vary.
If installing a rim mount faucet, make sure there is no interference
with drain overflow before drilling any holes. Consult local and
national codes for minimum air gap requirements if installing a
spout on the faucet deck.
This bath is designed for drop-in installation only. It is not suited for
use in a three wall alcove with an overhead shower.
Fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
42" (106.7cm)
2-7/8" (7.3cm)
3" (7.6cm)
Kohler Co.