How To Switch The Raid Mode; Hard Drive Replacement Instructions - Raidon SafeTANK GR3680-SB3 Manual De Usuario

Step 5 Use the provided cables to connect your computer to the preferred interface connection.
Step 6 Power on the unit and wait for the system to initialize. When the LCD display panel indicates
! ! "OK",the system has completed initialization and is ready for hard drive formatting.
! !
GR3680-SB3
RAID-1 vxxxxxx.x
!
! System initializing
When the GR3680-SB3 has completed initializing, your computer's operating system should recognize
the device automatically. Please follow the formatting instructions given by the operating system to format
the drives. Once the formatting has been completed, the system is ready for use.

5. How to Switch the RAID Mode

The default setting of GR3680-SB3 is RAID 1. To change the setting, please follow the steps below:
! ! Step 1 Press and hold the ▲ button while turning on the power until LCD display is showing as below:
! !
!
Step 2 If you are sure to switch the RAID mode, press "ENT" to accept. If not, press "ESC".
! !
Change to RAID-0
! !
Ent = Yes Esc = No
!
Step 3 This display indicates that the switch has been done successfully. Please reboot the GR3680-SB3.
RaidMode Changed
Pls Reboo
!

6. Hard Drive Replacement Instructions

In normal operational state, if the LCD displays "Pri : X" or "Sec : X" and the audio alarm activates, this
would indicate that the hard drive may be malfunctioning.
When this happens, you may choose to disable the audio alarm by pressing the MUTE button located at
the front of the system and continue to operate the system normally.
When finished, you may restart the
malfunctioning. If you are certain that the drive is in fact malfunctioning, follow the instructions below to
complete the replacement of the malfunctioning drive. !
SafeTANK GR3680-SB3 User Manual
Pri HDD : OK
Sec HDD : OK
Normal operational state
Change to RAID-0
Ent = Yes Esc = No
to double check and see if the drive is in fact
GR3680-SB3
6
Pri HDD : OK
Sec HDD : OK
GR3680-SB3
RAID-0 vxxxxxx.x