FIRST STEPS
REMOVING THE BATTERY COVER & BATTERY
Turn the power off and use the fingertip cutout
at the bottom of the phone to remove the back
cover (as shown below). Then use the fingertip
cutout at the bottom left corner of the battery
compartment to lift the battery out.
INSERTING A MICROSD CARD*
Turn the power off and remove the battery
cover (as demonstrated in the previous
instructions). Locate the microSD card slot.
Position the microSD card with the label side
facing up and slide it into place until it is fully
inserted and locked in place.
NOTE: The microSD card can be easily damaged by improper
operation. Please be careful when
inserting, removing or handling it.
* microSD card is pre-installed on the
device.
8