Yarvik PMP200 Manual De Instrucciones página 6

3. Press "M" to enter the "Display speed" menu.
4. P ress "Next" to increase the playback speed;
press "PRE" to reduce the playback speed.
Attention:
Once the playback speed is set, this will affect
every song until it is changed again.
• Repeat mode (Play submenu)
1. Please refer to the following descriptions.
2. Enter through the play submenu.
• Synchronised lyrics display
T he PMP200 supports the use of "*.Irc" lyric
files for synchronised lyrics display when
playing music.
How to use the lyrics file:
The song and lyric file must have the same name.
For example:
The song file name is xxx.MP3
The lyric file name should be xxx.LRC
If the song file has a matching lyric file,
the lyrics will be shown automatically when
the song is played.
What happens when an .LRC file is played
back?
1. T he matching lyrics file is found. The red dot
at the bottom of the screen turns green.
2. Press "M" button enter into the lyric interface.
3. Lyrics are shown on the screen.
4. P ress the "M" button to return to music
playback mode.
A-B repeat
1. E nter the music playback or recording
playback mode.
2. Press "M" to enter the play submenu.
3. Press "NEXT" to select the "Repeat mode" menu.
4. P ress "M" button enter "Repeat mode".
R epeat mode: Press the repeat icon "
to set starting point "A".
5. Press "NEXT" to confirm starting point "A".
P ress the repeat icon "
point "B".
6. P ress "NEXT" to confirm ending point "B".
R epeat icon "A-B" fixed. This starts repeat
playback between A and B, and it will exit
after reaching the set repeat time.
P ress "PRE" to re-confirm starting point "A".
(For repeat times please refer to "Repeat times").
In Repeat mode, press "VOL+" or "VOL-" to set
the "Playback speed".
Playback-after-recording function (does not
work with pre-recorded files)
1. Enter the "A-B" repeat function.
2. P ress "NEXT" to enter the playback-after-
recording mode.
3. W hen the repeat icon "
playback-after-recording icon "
to record the user's voice. The time length is
same as the "A-B" repeat time.
4. W hen the repeat time is over, it begins to play
the recording. The icon changes to "
then you can press the "Next" button to enter
the contrast function.
P ressing the "PRE" button while in this func-
tion will take you back to the "A-B" repeat
mode.
" "A"
" "B" to set ending
" changes to the
", it begins
";