Beckett WFK12 Manual De Instrucciones página 3

STEP 7
: Place the Bio-Filter Foam in the bottom of the Weir.
STEP 8:
Place your Lava Rock (Not Included) inside the
Mesh Bag and lay flat on top of the Bio-Filter Foam to prevent
it from floating.
STEP 9:
Build a mound with dirt or stones for your
Waterfall to your desired height, like a platform.
STEP 10:
Lay the liner on top of the platform but create
a trench that will draw water back into pond if you have
leaks.
STEP 11:
Pack the surrounding dirt mound until it is
solid.
STEP 12:
Secure the mound and Weir with flat rocks or
bricks.
STEP 13:
Place the Pump in the pond.
STEP 14:
Hide Tubing with plants and stones.
STEP 15:
Fill the Pond with water.
STEP 16:
Read the Instruction sheet for Pump, then
plug the Pump and Transformer into a GFCI receptacle.
STEP 17:
Enjoy your Waterfall!
Pond
GFCI
Receptacle
Mesh Bag
Lava Rock (Not Included)
Bio-Filter Foam
Liner
Mound
of
Dirt
Partially buried
Weir
Hide Tubing
with plants and
stones.