Complete instructions under Support section
1.
Getting started
INSERTING THE MICROSD CARD
Insert a microSD memory card (up to 32 GB capacity, not
included) in the card slot, gold contacts facing up. The card is
inserted correctly when a click is heard.
BATTERY INSTALLATION
Unlock the battery compartment cover by moving the lock
button to the right and remove the cover.
Insert the lithium-ion polymer battery (included) into the bat-
tery compartment.
CHARGING THE BATTERY
Using the included USB cable, connect
the camera to a USB power source and
select "CHARGE ONLY".
TURNING ON THE CAMERA
• To turn on the camera, press and hold the
welcome screen appears.
• To turn off the camera, press and hold the
shutdown screen appears.
BUTTON FUNCTION
1.
: ON-OFF/START-STOP
2.
M: Change mode/Next
3.
OK: Confirm entries/Zoom (+)*
4.
BACK: Exit the menu/Previous / Zoom (-)*
*XCEL-HD2 only
2.
Remote control
XCEL-HD: Start/stop the
photo/video recording.
XCEL-HD2: Select the record-
ing mode to take photos/
videos. Enlarge the image up
to 4X. (720p/480p)
3.
Modes
Press M button to switch mode.
•
To start and stop recording a video, press the
•
To take a photo, press the
TIME LAPSE
•
To start and stop taking photos, press the
SETTINGS
•
To access to the settings menu, press OK.
4.Settings
Video
mode
Photo
mode
TIMELAPSE
Mode
Date/
Time
Remote
control
Sound
signal
LED
Lights
Erase
Visit Xcelcam.com
VIDEO
PHOTO
VIEW
Changes video resolution: 480p, 720p and 1080p.
• Changes photo resolution:
XCEL-HD: 1, 3, 5MP
• Takes 1 to 6 consecutive photos with a delay of
approximately 0.5 second between each photo.
Takes photos at predefined regular intervals:
0.5, 2, 5, 10, 30, 60 sec.
To set date (Year/Month/Day) and time (Hour/Minute).
Use the OK button to confirm the entries and use the M
and BACK buttons to adjust the digits.
Enables or disables the remote control (wireless).
Enables or disables the sound of the camera when using
the buttons.
Enables or disables the LEDs lights. When the Remote
control and LED lights options are activated, the 4 LEDs
flash slowly to indicate that the camera is waiting for the
signal from the remote control and flash rapidly during
the recording of the videos/photos.
Erases the last file or all files.
Zoom
1X
2X
3X
4X
HD video recording
(480p, 720p ou 1080p)
Photo recording
XCEL-HD: 1,3,5MP XCEL-HD2: 5,8,12MP
button.
Photo recording at predefined regular intervals
(0.5, 2, 5, 10, 30 or 60 sec.)
To see the number of recorded files and view
photos/videos when the camera is connected
to a TV.
To configure the settings of the camera.
XCEL-HD2: 5, 8, 12MP
button a few seconds until the
button a few seconds until the
1
4
Subject distance
(approx.)
Up to 50ft
Up to 100ft
Up to 150ft
Up to 200ft
button.
button.
2
3