Hardware Installation - AirLive WP-201G Manual Del Usuario

Hardware Installation

This package contains the following components:
One Print Server
One Antenna
One Power Adapter
One Quick Installation Guide
One CD-ROM (Including all the software utilities, drivers and User's Manual)
1. Unpack the print server package and verify that all the items listed in the previous section are provided
2. Connect the print server to the printer you want to share on the network.
3. Connect the print server to your network by attaching the network cable to the UTP port of the print
server
4. Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test
(POST) after it is powered on. During the POST, the Printer Port LEDs will be on. When the LEDs are
unlighted, the print server is ready.
Note: You must use the power adapter that came with the print server, do NOT use any other power
adapter from other sources.
English
4
WP-201G v2