Turning The Device On/Off; Bluetooth Pairing - IRiver Astell&Kern XB10 Manual De Instrucciones

Balance Port
You can listen to music by connecting with
an earphone or headphone that support the
balance cable (2.5 mm).
Micro USB connector (only charging)
Connect the device with 5V 2A adapter (sold
separately) or PC using Micro USB cable.
Charging starts.
Built-In Microphone
Supports phone call functionality.

Turning the Device On/Off

1. Push the power key on the side of the
device to the right for 3 seconds and you
will hear a beep sound and see a blue light
on the indicator before the power is on.
2. Push the power key on the side of the
device to the right for 3 seconds while
the device's power is on and you will hear
a beep sound and see a red light on the
indicator before the power is off.

Bluetooth Pairing

Qualcomm® aptX™ / Qualcomm® aptX™ HD audio
The XB10 supports Qualcomm aptX and
Qualcomm aptX HD audio codec standards.
Qualcomm aptX and Qualcomm aptX HD
audio codecs only work on smartphones and
audio devices that support the technology.
1. You can turn on the power by pushing the
power key on the side of the device to
the right for 3 seconds.
2. Press the Bluetooth key for 3 seconds
and you will hear a beep sound and see
flashing blue and red lights alternately
before pairing is ready.
3. Turn on Bluetooth of the device with
which you want to connect.
4. Select this device on the list of devices
available for Bluetooth connection for
pairing.
Setting up iOS>Bluetooth>Select "XB10"
Setting up Android>Bluetooth>Select
"XB10"