Technical Specifications; Control Buttons - Partner TWS EP003 Manual Del Usuario

EN

TECHNICAL SPECIFICATIONS:

Bluetooth version: 5.0
Frequency: 2.402-4, 480 GHz
Wireless range: 8-10 m
Battery: 4.2v/50 mAh
Usage time: 2-3 h
Stand-by time: 100 h
Charging time: 1 h
Operation temperature: -40-80 °C
POWERING ON EARPHONES
Press and hold down the Start button for 4 seconds until the LED indicator lights up in blue. It should
be accompanied by a "power on" sound. When not in use for more than 5 minutes, the appliance
powers off automatically.
CHARGING EARPHONES
When the battery level drops, the LED indicator lights up in red, which is accompanied by a „low
battery" sound appearing every 2 minutes. During charging the TWS earphones power off
automatically and the LED indicator lights up in red. The LED diode turns off when the earphones are
fully charged.
SYNCHRONIZATION
Paring with one device: after turning on the pairing mode on an earphone the LED indicator starts
flashing red and blue alternately. In order to connect one TWS earphone turn on the Bluetooth
functionality on your mobile device and connect it with the TWS earphone. If the phone requires a PIN
code, enter "0000".
Paring is only required when connecting the TWS earphones with your mobile device for the first time
– each following synchronization is made automatically.
Pairing with two earphones: turn on both TWS earphones simultaneously. If the LED indicator flashes
red and blue alternately for 1-2 seconds it means that the devices are pairing automatically.
Note: The connection between the earphones and a mobile device is closed when the earphones are
out of range, and they reconnect automatically when they are within range again.

CONTROL BUTTONS:

1. To turn on / turn off the device press and hold down the button for 4 seconds
2. To decline an incoming call press and hold the button down for 2 seconds
3. To answer an incoming call and to listen/pause music press the button shortly
4. To redial the latest number double press the button.
TWS EP003