Haverland RCV LCD Manual De Instrucciones página 51

3. OPERATION
3.4.4 MANUAL MODE
If you do not want to set your radiator, we recommend you choose the MANUAL mode, where you can
select the required temperature between 12 and 30 ºC.
We recommend choosing a temperature between 20 - 21 ºC.
Step 1: Successively press the
Step 2: Press the
Paso 3: Press the
confirm.
During the selection of the requested temperature, a pilot light above the display
will change colour according to the selected setpoint temperature.
•
•
•
• We recommend selecting a temperature between 20 and 21 ºC.
• Press the
button until
button to confirm. The pre-set temperature is displayed in manual mode.
or buttons to set the target temperature. Press the
Red
if the chosen temperature is equal to or greater than 24 ºC.
Orange
if the chosen temperature is between 19.5 and 23.5 ºC.
Green
if it is less than 19.5ºC.
This symbol means that the radiator is heating up; the room
temperature is lower than the selected temperature. As soon as the
setpoint temperature is reached, the symbol will disappear from the
display.
button if you want to know the room temperature.
appears on the screen.
The setting can be
made between a
minimum of 12 ºC and
a maximum of 30 ºC.
RCV LCD
EN
button to
EN
51