Tabla de contenido
Publicidad
GB – English
Introduction
Important note:
• Before attaching the digiscope adapter and camera to the eyepiece of the scope, please ensure that
the eyepiece and scope are securely fastened and capable of holding such weight.
• When you attach the camera to the adapter, ensure that there is sufficient space for the zoom lens of
the camera to extend without causing any damage to the eyepiece.
Package contents:
• 1x Digiscope adapter
• Manual
Technical specifications
Eyepiece size: 28 – 42 mm (1-1.65")
Platform load: max. 2 kg (4.5 lbs)
User instructions
©2012 NEDIS BV. Camlink is a registered trademark of NEDIS BV. Although every effort has been
made to ensure the accuracy of the information contained in this manual specifications are subject to
change and therefore NEDIS BV cannot guarantee its correctness and completeness at all times.
Recommended
A. Clamp adjustment knob
B. Adjustable eyepiece clamp
C. Camera platform
D. Camera adjustment grooves
E. Camera mount screw
F. Platform horizontal adjustment
G. Platform vertical adjustment
Not recommended
3
Publicidad
Tabla de contenido
