Maintenance And Cleaning; Package Contents - PROZIS BODY'UP Manual Del Usuario

EN
CAUTION! RISK OF MATERIAL DAMAGE
• Protect the product from dirt, moisture and overheating, and
use it in dry environments only.
• Do not expose the device to direct sunlight or high
temperatures (above 40°C).
• Never submerge the device in water.
• Do not open, disassemble or attempt to repair the device.
• Use this device only with electrodes and accessories
recommended by the manufacturer.

MAINTENANCE AND CLEANING

• Switch the device off and remove all plugs before cleaning!
• Do not use chemical or abrasive cleaning agents.
• Do not use scouring milk or steel wool. These will damage the
upper surface of the appliance!
• If the main device is dusty, please wipe it using a dry towel.
• Do not wash the device with the accessories.
• Make sure that moisture does not enter the device during
cleaning to prevent damage.
HOW TO CLEAN THE ACCESSORIES:
• Separate the device from the accessories.
• Wash separately
• Hand wash only
• Detergents are allowed
• Cold wash (below 30°C)
• Rub using your hands
• Dry in a cool, dry place
• No dry cleaning
• No ironing
• No bleaching
• No soaking
• No machine washing
STORAGE
• Store the device in a cool, dry place, away from direct sunlight.
• Recharge the device on a regular basis if not to be used for a
long period of time.
• When the storage period exceeds 6 months, please open the
box to check the product and press the power button to see if
it's working normally.
6
User manual

PACKAGE CONTENTS

• 1 × PROZIS Body'Up EMS
• 1 × USB charging cable
• 1 × User manual
• 1 × Spray bottle
PRODUCT DESCRIPTION (SEE PAGE 2)
INSTRUCTIONS FOR USE
Functional area description
1
LED light
2 Down
3 On/Off
4 Up
5 Magnetic buckle
6 Charging port
• The device has 10 adjusted levels of intensity and works for
20 minutes.
• Press the button to switch on the device. The LED
On/Off
light will flash, and the device will beep once.
• Press the button to switch off the device. The LED
On/Off
light will flash, and the device will beep three times.
• After switching on the device, press the
the intensity. There are 10 levels of output intensity. When
you switch on the device, the default level is the first one.
Whenever the intensity is adjusted, the LED light will flash and
beep once. When adjusted to the highest or lowest level, the
LED light will flash twice in a row as a reminder.
• Should the device be suddenly removed from the skin, the
LED light will flash and beep as a reminder. Once reattached,
the intensity will be returned to the first level.
Charging Method
1 Please use the attached USB cable to charge the device
before use. The USB cable can be connected to a computer or
adapter and ensures that each charge is enough for 1.5 hours.
2 LED light status during charging: the light will flash when the
device is charging and will stay on once fully charged.
3 The device can be used continuously for about 8 hours after
being fully charged.
EN
or button to adjust
+ -
7