Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
5
15
Step 2:
Fasten the supports (#3) to the legs (#2) by using bolts
(#5). Keep the bolts loose. See Figure 2.
Note:
The arrow marks on the supports (#3) should coincide
with Figure 2 to ensure proper assembly.
FIGURE 4
Warranty
• This product is covered by Courtyard Creations Inc.'s one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
V-3
2
3
3
#5 BOLT M6*15
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
4
2
Step 3:
Fasten the supports (#3) to the underside of the table
top (#1) rim by using bolts (#4). Make sure that all of
the bolts have been tightened completely. See Figure 3.
Step 4:
Turn the table to its upright position. See Figure 4.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and safety of
your table.
• When moving the table, lift. Do not drag this table.
• We recommend the use of furniture covers when not
in use.
• In order to prolong the life and beauty of your table,
we recommend that it be stored in a dry and protected
area during off season periods.
PAGE 2 OF 2
2
3
3
1
35
#4 BOLT M6*35
2
Publicidad
