Changing User Options - ACP OnCue Guía De Consulta Rápida Para El Arranque

Quick Start Reference Guide

Changing user options

Options such as single or double pad programming and beep volume can be changed to suit individual preferences.
To change options:
1. Press and hold pad 2 for approximately 5 seconds with door open.
2. Option appears in display.
• Oven is now in options mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
• Changes take affect after START pad is pressed.
• To change additional options, repeat steps 3 and 4.
5. Press START pad to return to Options. Open and close oven door or press STOP to exit.
Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
End of Cycle Message
Time
6
Stop during
cooking cycle
7
Maximum Cook Time Entry
8
Time Entry
9
Double Digit Operation
0
ON-THE-FLY Cooking
Part No. 20015916
Printed in U.S.A. 8/15
Display Options (Factory Settings in Bold)
OP:10 3 second continuous beep.
OP:11 5 second beeps once.
OP:12 Continuous beep until done disappears.
OP:13 Repeating 5 beeps bursts until door is opened.
OP:14 Continuous beep until stop pad is pressed or door is cycled.
OP:15
Repeating 5 beeps burst until stop pad is pressed or door is cycled.
OP:16
No beep.
OP:20 Eliminates beep.
OP:21 Sets volume to low.
OP:22 Sets volume to medium.
OP:23 Sets volume to high.
OP:30 Prevents beep when pad is pressed.
OP:31 Allows beep when pad is pressed.
15 seconds after oven door is closed, keyboard disabled.
OP:40
30 seconds after oven door is closed, keyboard disabled.
OP:41
1 minute after oven door is closed, keyboard disabled.
OP:42
2 minutes after oven door is closed, keyboard disabled.
OP:43
10 seconds
OP:50
20 seconds
OP:51
30 seconds
OP:52
40 seconds
OP:53
60 seconds
OP:55
1 minute 10 seconds
OP:56
OP:57
1 minute 20 seconds
OP:58 1 minute 30 seconds
1 minute 40 seconds
OP:59
OP:60 Pressing stop clears information, opens door.
OP:61 Pressing stop pauses oven with door closed.
OP:62 Pressing stop pauses oven with door open.
OP:70 Allows 5 minutes of heating time.
OP:71 Allows 10 minutes of heating time.
OP:80 Allows use of preprogrammed pads only.
OP:81 Allows use of manual time entry and preprogrammed pads.
OP:90 Allows 10 (0-9) preprogrammed pads.
OP:91 Allows 100 (00-99) preprogrammed pads.
OP:00 Disables ON-THE-FLY Cooking.
OP:01 Allows ON-THE-FLY Cooking.
F
or full product documentation visit:
www.acpsolutions.com
 2015 ACP, Inc.
Cedar Rapids, IA 52404