Storage; Troubleshooting; Disposal - Imetec N8901 Instrucciones De Uso

WARNING! Make sure all cleaned parts are completely dry
before reusing the appliance.
• Clean the external surface of the kettle with a soft, damp cloth and dry it with a soft, dry cloth
• Do not use metal scouring pads or stain removal and corrosive agents
• For the appliance to work correctly, it is very important to regularly clean and remove the limescale
using a descaling product suitable for kettles.
• Once descaled, let the appliance boil water several times and rinse thoroughly with fresh water to
completely eliminate any residual descaling agent. If the filter (12) needs to be descaled, remove it by
pulling it up, and pulling the two hooks from their seats [Fig. D and E] and immerse it in the descaling
solution.
• Rinse under a tap while brushing it with a toothbrush with soft bristles.
WARNING! Once you have finished using this appliance, make
sure it has cooled down completely before putting it away.
Should one of the problems indicated occur, adopt the proposed solution:
Problem
The water does not boil
The thermometer does not work
The packaging of the appliance is made of recyclable materials. Dispose of it in accordance
with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment. Alternatively, instead of handling the disposal, the user can hand
over the appliance to the retailer when a new, equivalent one is purchased. The user can hand over
electronic products measuring less than 25 cm to retailers of electronic products having a sales area
of at least 400 m free of charge and with no obligation to buy. Appropriate separate collection for the
2
subsequent procedure for the decommissioned appliance for recycling, which includes treatment and

STORAGE

TROUBLESHOOTING

Make sure the lid is closed (1).
Make sure that the kettle is positioned correctly on the electrical
support (7) and that the on/off lever (5) is lowered.
Little water in the kettle.
The thermometer is malfunctioning - bring the kettle to the
assistance centre.

DISPOSAL

Solution
EN
13