Assembly; Attach Frame With Wheels; Attach Frame With Feet; Fix Frames Together - Buffalo P111/U022 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Assembly

Remove the appliance from all packaging. and lay the BBQ top carefully on its side.

1. Attach Frame with Wheels

Attach the frame to the mounts on the underside of the appliance.
1.
Use the a short bolt and nut for each leg. Do not tighten.
2.
Note: Ensure the legs are orientated correctly (see image). Failure to do so results in the
appliance sitting at an angle.

2. Attach Frame with Feet

Slot the other frame into the recess on the underside of the appliance.
1.
Screw the retaining bolt into the recess, fixing the frame in place.
2.

3. Fix Frames Together

Cross the frames over. The frame with feet should fit 'inside' the frame with wheels.
1.
Attach the frames using a long bolt and nut for each, placing a washer between the two frames.
2.
Tighten all nuts and stand the appliance upright.
3.
Slot cooking grids into place.
4.

Installation

Position on a flat, stable surface.

Gas Regulator

It is essential that the correct Gas Regulator is attached to the appliance. The regulator included is correct
for the country of sale.
If the regulator needs to be replaced for any reason, contact your supplier or a qualified gas engineer.

Connect Gas Supply

WARNING: This appliance is designed to work with Propane gas only. DO NOT attempt
to operate this appliance with any other form of gas.
Attach the hose to the regulator, (if included separately) or ensure the connection is secure if already
1.
attached.
Attach the regulator to the gas bottle. Tighten the nut securely.
2.
Turn the gas supply on low and ensure there are no leaks.
3.
Turn the gas supply off when the check is complete.
4.
WARNING: If a leak is found DO NOT use the appliance. Turn off and disconnect from
the gas supply and consult a qualified technician.
UK
2