aldes Smart Control Manual De Instrucciones página 3

LIST OF FIGURES
Fig. 1: Installation on flat surface
Fig. 2: Removing the front cover
Fig. 3: Removing the back cover
Fig. 4: Dimensioned drawing to facilitate installation in wall box or
panel front
Fig. 5: Connecting Modbus via the RJ12 6P4C port
Fig. 6: Connecting Modbus via the screw terminals
INTRODUCTION
OJ-AIR2-HMI-35T is a touchscreen panel with user-friendly graphi-
cal user interface specially developed for controlling ventilation
systems. The panel communicates with the Aldes Smart Control
via a Modbus interface, ensuring easy installation.
PRODUCT PROGRAMME
Product
OJ-AIR2-HMI-35T
OPERATION
If the screen saver is active, sim-
ply touch the screen once to open
the home screen.
This screen provides access to
elementary functions such as fan
speed, temperature and setup.
The time and day of the week
are shown in the top line of the
screen. Below these, an alarm
bell is visible if an alarm has been
activated. The house in the mid-
dle section of the screen provides
access to a simple overview of
temperatures, air volumes and
filter pressures. The temperature
Aldes Smart Control
English
Type
3.5" touchscreen panel
®
®
3