Engine code
F6JA, F6JB, F6JC, F6JD
TZJA, TZJB
G8DA, G8DB, HHDA, HHDB, HHJA, HHJC,
HHJD, HHJE, HHJF
RTA, RTB, RTC, RTD, RTG, RTE, RTF, RTH, RTJ, RTK
RFN
BHPA, HCPA, HCPB, KKDA, P7PA, P9PA,
P9PB, R2PA, R3PA, RWPA, RWPC, F9DA/B
FFBA, FFWA, KHBA, QYBA, QYWA
KKDB
C9DC
RVA
G6DA, G6DB, G6DC, G6DD, G6DE, G6DF, G6DG, UFDB,
TXDB, TYDA, UKDB, QXBA, AZBA, KLBA, QXBB, LPBA,
AZBC, TYBA, UKBA, UFBA, TXBA, IXDA, QXWA, QXWB,
AZWA, KLWA, AZWC, TYWA,UKWA, TXWA, UFWA,
UFDA,TXDA, UKDA
Q4BA, KNBA
4BA, 4BB, 4BC 4CC, 4FA, 4CA, 4CB, 4DA,
4EA 4FA, 4FB, 4FC, 4FD, 4GA, 4HB, 4HC
4EB, 4EC, 4ED 4GA, 4GB, 4GC, 4GD, 4GE, 4GF, 4HA, 4HD
F6JA, F6JB
F6JA, F6JB
Y6
UGJC
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and crankshaft
timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft
timing positions
8
OEM item number
303-735 /
21-263 /
303-1059 /
303-1277 /
303-1270
49JE02021
●
●
●
●
●
●
●
●
●
●
●
21-104 /
23-020
303-193
●
●
●
●
●
●
●
●
●
21-162B /
303-376 /
303-367 /
303-376B
●
●
●
●
●
●