Descargar Imprimir esta página

Beta 1461/C29B Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
INSTRUCTIONS FOR USE
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain
has been removed (unless specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening cran
kshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been remo
ved
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the
camshaft and crankshaft timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism
fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary
instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
6
EN

Publicidad

loading