ARIETE 2768 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
• Do not use the appliance if the power cord or the plug are damaged, or if the
appliance is faulty. All repairs, including the power cord replacement, must be
carried out only by the Service Center or by authorized technicians, in order to
avoid any risk.
To dispose of product correctly according to European Directive 2012/19/EU,
please refer to and read the provided leaflet enclosed with the product.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
DESCRIPTION OF THE APPLIANCE
A Rotating brush
B Handle
C Lower rod segment
D Upper rod segments
E Rod support
F Charger
G On/Off button
H Operation indicator
I
Dust container
HOW TO INSTALL THE APPLIANCE
1) Insert the rod support (E) in the seat on the back of the appliance (Fig 2).
2) Rotate the rod support in clockwise direction, upwards, until it locks (Fig 3).
3) Pull up the rod support (Fig 4).
4) Insert the lower segment with the shortest plastic insert (C) in the rod support. Connect the two
remaining segments (D) to the lower segment to form the rod (Fig 5).
5) Insert the handle (B) in the upper part of the rod.
FIRST USE
The appliance is sold with uncharged battery. Before using it for the first time, keep charging the
appliance for at least 10-12 hours.
Incomplete charging before first use can compromise the appliance performance.
BATTERY CHARGE
1) Connect the charger to the base (Fig 6).
2) Insert the charger plug into a standard outlet. The ON indicator light (H) turns on.
3) For a full charge, keep the appliance charging for 6-8 hours.
4) Disconnect the charger from the base. After a full charge, the appliance can work for 40-50 min-
utes.
INSTRUCTIONS FOR USE
Turn the appliance on and off
Press the on/off button (G) to start the appliance.
Press again the on/off button to turn off the appliance.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido