HQ EL-ES03HQ Manual De Uso página 2

Introduction:
This smart TV power saver is designed to cut down the standby power consumption
of your connected TV in order to reduce the energy costs and therefore save money.
This power saver will automatically turn off the power after you've put the TV in
standby mode. The EL-ESO3HQ is very easy to operate, since it works with your
current remote control for your TV, SAT, HiFi or DVD player.
Operation:
1) Plug the electrical appliances into the available sockets on top of the EL-ES03HQ,
connect appliances such as a TV, DVD and amplifier
2) Place the IR sensor in front of your electrical appliances, so you can use the
appliance's remote control for your EL-ES03HQ
3) The EL-ES03HQ uses the IR remote control of various devices to operate, use
the remote control in a straight line, without any obstacles.
4) Plug the EL-ES03HQ into a wall socket, wait a few seconds and push the ON/
OFF switch to turn on the electrical appliances, the indicator light will turn on
5) To turn off: all connected electrical appliances has to be in stand by mode, wait a
minimum of 30 seconds, before you press the ON/OFF switch, the indicator light
will then turn off
6) To change the number of connected appliances, press the reset key on the
EL- ES03HQ for a period of 4 seconds continuously until the indicator light
flashes, then repeat 4)+ 5)
EL-ES03HQ_A5.indd 2
ENGLISH
Controlled power
socket
On//Off Reset
Switch
Infrared signal
receiver
2
Stable
power-on
socket
2009.6.30 2:15:41 PM