Gima 41700/LD Manual De Instrucciones página 18

ENGLISH
18
Step 5:
Insert the stem into the hole of the elastic diaghragm. Push the stem in as far as
possible. Place the diaphragm with stem into the seal seat, make sure the diagh-
ragm edge and seal seat edge close fitting. If there's no "O" shaped sealing ring on
the plug at the bottom of the sealing seat, please put in on.
Figure 5-1 Figure 5-2 Figure 5-3
Step 6:
Attach the handle on diaphragm with stem by hooking the U- shape hole in the
groove of the stem. Push down the handle onto the seal seat until its well placed.