Motorola MBP36XL Guia De Inicio Rapido

QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide (available for
download from www.motorolastore.com).
1. Setting up your Digital Video Baby Monitor
MODELS:
MBP36XL,
A. Connecting the power supply for the Baby Unit.
MBP36XL-2,
MBP36XL-3,
MBP36XL-4,
MBP36XL-G2
Strangulation Hazard: Children have STRANGLED in cords. Keep the cords out of the
reach of children (more than 3 feet away).
Never use extension cords with AC Adapters. Only use the AC Adapters provided.
B. Connecting the power supply for the Parent Unit.
• Connect the small plug of the power adapter to the parent unit and the other end
to the electrical outlet.
• Only use the enclosed adapter (5V DC/1000mA).
• A rechargeable battery (Lithium-ion battery 3.8V/2000mAh) inside the Parent Unit
allows you to move it without losing the link and picture from the Baby Unit. The
battery gives up to 5 hours operation for the Parent Unit. We recommend you charge
it for at least 16 hours before first use, or when the Parent Unit indicates the battery is
low.
• Press and hold the POWER button
NOTE
When the Baby and Parent Units are both turned on and within range, the Parent Unit
should show a color image from the Baby Unit camera, but if the room is dark, the
image will be in black and white, with a
illumination by the Baby Unit.
2. Basic operation of the keys
Parent Unit
0
+-
<>
M
O
V
T
Baby Unit
ON/OFF switch
PAIR button
3. General Information
If your product is not working properly, read this Quick Start Guide or the User's Guide of one of the
models listed on page 1.
Contact Customer Service:
US and Canada 1-888-331-3383
Email: support@motorolastore.com
Consumer Products and Accessories Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product manufactured under license by Binatone
Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product
("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to
be free from defects in materials and workmanship under normal consumer usage for the period
outlined below. This Warranty is your exclusive warranty and is not transferable.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER
RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE
COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF
PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS
CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND
REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS.
FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF
YOUR COUNTRY, PROVINCE OR STATE.
WARNING:
ON/OFF button
UP/DOWN buttons
LEFT/RIGHT
buttons
MENU button
OK button
VIDEO button
TALK button
Volume buttons
RESET button
• Connect the micro-USB plug of the power
adapter to the Baby Unit and the other end
to a suitable mains power outlet.
• Only use the enclosed adapter (5V DC/
1000mA).
• Ensure the ON/OFF switch is at the "ON"
position.
IMPORTANT: The Baby Unit is able to operate
without mains power for up to 3 hours with the
support of a built-in rechargeable battery
(Ni-MH battery 3.6V, 900mAh). Please charge
the unit at least 16 hours before first time use.
on the top of the Parent Unit to turn it ON.
0
icon showing, due to the infra-red
Press and hold to switch the Parent Unit ON/OFF.
Press to tilt the camera up or down.
Press to move up or down menu settings.
Press to pan the camera left or right.
Press to move left or right across menu options.
Press to open menu options or exit the menu.
Press to confirm a selection.
Press to turn the LCD screen ON/OFF.
Press and hold to talk to your baby.
Press -/+ to adjust the volume of the parent unit.
Press and hold with a small pin to reset the unit.
Slide the switch to the left to switch on the Unit.
Slide the switch to the right to switch off the Unit.
Press and hold the button on the underside of the
Baby Unit to register the camera to a Parent Unit.
US EN