Master MS Seeds Manual De Uso Y Mantenimiento página 20

Unhook the clips and remove the hopper (G). Clean
3
it with the provided sponge and Master Clean.
Open the protections covers of the screening area
5
and expose the screening drum and the upper
brush.
Reassembly
Close the protections covers of the sieve area.
1
Place the hopper (G) on top of the silicone
3
gasket (H) and secure it with the clips. Look
carefully at the shape of the hopper base (G) to
insert it correctly.
20
Remove the silicone gasket (H) and the
4
shelling system. Clean the gasket (H) and the
sheller with hot water (silicone grill and
Clean the drum , brush and the rest of the MS Seeds
6
(A) machine, preferably with compressed air, with
the provided sponge and Master Clean. The drum
and brusch was elements must be cleaned regulary.
Fit the silicone gasket (H) and the sheller.
2