Horizon Global 76382 Instrucciones De Instalación página 4

Standard installation:
1. Lower muffler (for standard model) or diesel canister (for EcoDiesel
model) – Using exhaust removal pliers, lower muffler if required
(standard model). Using 16mm socket, remove (2) 10mm bolts from
diesel canister (EcoDiesel model). Note: Be sure to support exhaust
before removing rubber hangers.
Standard installation
EcoDiesel installation
©2020 Horizon Global™ Corp - Printed in Mexico
Standard installation:
2. (a) Install hitch – Raise hitch onto the vehicle cross member at a 15° - 45°
(b) Loosely install (1) M12 bolt ①, (1) 1/2" flat washer ③, (1) 1/2" conical
angle and align leftmost hole in hitch with existing hole in cross member.
washer ②, and (1) M12 hex nuts ④ to hold hitch in place.
Leftmost hole
Sheet 4 of 21 76382NP 11-06-20 Rev. A