HOW TO USE
Before use, check the heater for visible damage. DO NOT USE THIS HEATER if there is
evidence of damage. If any damage is found, contact Consumer Service.
1. Position heater so airflow is not obstructed.
2. Plug power cord into standard grounded wall outlet.
3. Press the power switch (-) to the on position.
4. Select a Mode - Low Heat (I) or High Heat (II) setting. To use as a fan, select the
center position on the switch for Fan Only
12 English
CONTROLES
VISTA FRONTAL
VISTA TRASERA
APAGADO
LUZ INDICADORA DE PODER
La luz ámbar se ilumina para
indicar que el calentador está
encendido.
MODO
Calor Elevado (II) 750 watts
Solo ventilador
Calor Bajo (I) 375 watts
Español
29