Famastil F-Power Manual De Instrucciones página 22

05 Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to
06
a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing
07
and balance at all times.
This enables better control of the
08
power tool in unexpected situation.
Dress properly. Do not wear loose
09
clothing or jewellery e.g. a necktie or
necklace.
It is recommended that the electric supply to this appliance should include
a residual current device that will interrupt the supply if the leakage
01 Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
Do not use the power tool if the switch
02
does not turn it on and off. Any power
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
Disconnect the plug from the power
03
source when not in use and before
making any adjustments, changing
accessories, cleaning or storing power
tools and if the tool stops unexpectedly
or appears to malfunction. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools in clean dry
04
conditions and out of the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
22
current to earth exceeds 30mA for 30ms.
POWER TOOL USE AND CARE
10 Keep your hair, clothing and gloves
away from moving parts.
11 Loose clothes, jewellery or long hair
can be caught in moving parts.
12 Keep power tool away from heat,
direct sunlight, moisture, rain (it must
never be immersed into liquids) and
freezing temperatures.
13 Do not use appliance with wet hands.
Keep power tools free from oil grease
14
and other solvents, so a not to impair
your grip.
05 Maintain power tools. Before each
use check for misalignment or binding
of moving parts, breakage of parts and
any other condition that may affect the
power tools operation. If damaged,
have the power tool repaired before
use. Keep the handle and casing free
from oil and grease. Many accidents
are caused by poorly maintained power
tools.
If a Cord becomes damaged during
06
use, disconnect the supply cord from
the mains immediately. DO NOT TOUCH
THE CORD BEFORE DISCONNECTING THE
SUPPLY.