Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 6
7
#7 BOLT M6*35
Step 5:
At the back of the glider, fasten the seat assembly (#5) to
arms (#1 and #2) by using bolts (#7). See Figure 6.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use
bleach, acid, or other solvents on the frame or fabric parts.
• We recommend the use of furniture covers to protect your glider when not in use.
• Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your glider.
• In order to prolong the life and beauty of your glider, we recommend that it be stored in a dry and protected
area during off season periods.
Warranty
• This product is covered by Courtyard Creations Inc.'s 3 years limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
V-3
5
2
35
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
DO NOT RETURN TO THE STORE!
STOP
FIGURE 7
1
Step 6:
Tighten the bolts on the seat assembly (#5). Make sure that
all of the bolts have been tightened completely.
See Figure 7.
PAGE 3 OF 3
Publicidad
