DGFAN VR-003 Manual Del Usuario página 8

 Operation Instructions
Recording
1. Slide the power switch upward to turn on
the recorder, then press the 'REC' to start
recording. The red LED recording indication
light will remain on during the duration of
EN
the audio recording.
2. While recording, press the 'REC' to pause the
recording; and press it again to resume. While
the recording is paused, the red LED light will
flash.
3. To stop and save a recording, press 'STOP'.
Stop
Record
NOTE:
 The recorder will automatically go into
standby mode if left inactive for 5 minutes
or longer. Press and hold 'PLAY' to turn the
recorder back on.
 Press and hold 'PLAY' at any time to turn
off the device to conserve battery power.
 During recording, please don't slide power
switch down to turn off the device,
otherwise, the device or recording file will be
damaged.
08:05:39
PCM1536K
8
ON/OFF
REC File Name
Recording Time
Total Time
Remaining