Rich Context KTS791F Instrucciones De Armado

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL
PARTS LIST
PART
MATERIAL CODE
NO.
1
KTS791F-CS04-6
2
KTS791F-CS02-1
3
KTS791E-CS01-2
4
KTS791E-CS01-3
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the back assembly (#1) onto a non-abrasive surface,
such as a carpet. Insert the back assembly (#1) into the seat
assembly (#2). Fasten the middle bar on the underside of the
seat assembly (#2) to the back assembly (#1) by using bolt
(#5). Keep the bolt loose. See Figure 1.
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the bench is completely assembled.
!
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
!
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
!
Retain these assembly instructions for future reference.
!
Quote the following FQC NO. when contacting the service center.
V-3
USE INTENDED FOR RESIDENTIAL USE ONLY.
KTS791F
PART Q'TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP DO NOT RETURN TO THE STORE!
PAGE 1 OF 2
5
17C40A0705001YX
1 6
17C40A0722001YX
1 7
17C40A0712001YX
1 8
17KAA0101----Y4
1 9
17KAC3101----Y3
FIGURE 1
5
BOLT M6*15
BOLT M6*65
BOLT M6*35
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 10MM
2
1
15
#5 BOLT M6*15
COURTYARD CREATIONS INC.
5
2
2
1
1
2
1