Mobile Pixels DUEX PRO Manual De Usuario página 11

REMOVING THE METAL PLATES
1.
Take DUEX PRO off from the
back of the laptop.
3.
Once the adhesive is warmed
up, it is ready to be removed. A
plastic scraper (not included)
is recommended to remove
the adhesive.
2.
Get a hair dryer and set it to
medium heat level (do not use
high heat setting as it may
over heat your own laptop).
Gentlely apply the warm air
across the metal plates to
soften the adhesive material
(don't continuously focus on a
single area).
4.
Now the surface is fresh and
ready for a new set of plates.