Dab Radio; Phono Operation - Denver Electronics MRD-166 Manual De Funcionamiento E Instrucciones

57 Tuning/folder down
OPERATING INSTRUCTIONS

DAB radio

Press FM/DAB button to choose DAB Mode
If the system is switched on for the first time, it will automatically enter into the DAB mode
and perform an auto scan function. During the scan the display will show "Scanning ..."
together with a slide bar that indicates the progress of the scan and the amount of stations
that have been found so far. Once the scan has finished, the radio will select the first
alphanumerically found station. You can now press the
stations followed by pressing the

Phono Operation

1. Press the volume/power ON/OFF knob to turn the equipment on.
2. Use the function selector to select PHONO mode.
NOTE: Should your record stop before the last track finishes, set the auto stop control to
OFF. Your record will now play to the end, but you will have to stop the turntable rotation
manually. (Return the tone arm to its rest manually and if the turntable is still rotating, switch
off the unit via the volume control knob. Then set the auto stop control back to ON.)
Encoding
1. Set the function button to PHONO, CD, AUX or Cassette mode.
2. Press the record
device, then the USB or SD icon will flash on the LCD display.
3. Press the skip up
or SD) for encoding/recording, then press the record
confirm.
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start in encoding/recording mode after a few seconds.
5. Start playback of the music you want to encode/record.
button to select the station of your choice.
REC button. It will take about 3 - 4 seconds to read the memory
or skip down
or
button to select the desired mode (USB
4
button to explore the found
REC button again to