Charging Battery; Installing Memory Card; Transferring Files - Prestigio PER5474BC Manual De Instrucciones

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
This product uses 5V/1.5A standard voltage; Please use the attached power charger,
other chargers may cause failure and risk.
Do not use the charger in humid environment. If your hands and feet are wet, please
do not touch the charger.
When using the charger or charging the product, please maintain good ventilation, do
not cover the machine with paper or other items resulting in reduced cooling effect.
Note:
a. You are strongly recommended to charge the battery immediately when the device indicates the battery
is lower than 15%!
b. For extended battery life, it is suggested NOT to use the device when it is charging.
c. Be sure to use only the dedicated AC adapter provided with the unit for charging.

Installing Memory Card

The device supports micro SD/SDHC cards.
To insert a Micro SD card, place the card connector towards the front side of the
device and the printing side of the card towards the rear side of the device.
To remove the micro SD card, gently press the edge of the card to release the
safety lock and pull the card out of the slot.

Transferring Files

Before reading or playing files, you may need to transfer media files from a computer
to the device.
(1) Connect the device to a computer with the supplied USB cable. Two removable
disks will be added to the computer, respectively referring to the internal flash
memory and the SD card.
(2) Once the connection is done, turn on the USB storage.
(3) Open a removable disk, then copy files from the PC to it.
Note:
Since pre-installed applications and Android OS occupy a considerable part of capacity – about 2.0GB, it is
normal that you see huge difference between available memory space and total capacity.
4