Using The Radio - SPC CHILLY RADIO Manual De Usuario

USING THE RADIO

AC CONNECTION
Connect one end of the cable of your SPC Chilly Radio to
the AC IN input (9) and the other to a mains socket (230
V ~ 50 Hz).
BATTERY OPERATION
Before installing the batteries (not included), make sure the
device is disconnected from the mains (AC input).
Remove the battery cover at the bottom by gently pressing
down on the tabs and pulling slightly outwards.
Install the 3 batteries (not included) in the position shown
(respecting the polarity) and then return the cover to its
original position.
OPERATION
Connect to the mains or install batteries following the
instructions above. Slide the FUNCTION switch (6) and
select the desired mode; OFF / AM / FM.
12