BEFORE FIRST USE
• Remove all packing material and stickers from the product and save instruction manual.
Caution: Tear up all plastic bags as they can pose a risk to children.
•
Cut and remove tie wrap located between the electric plug blades.
•
Before using your new appliance, wipe the body of the appliance with a damp cloth.
•
Condition the non-stick cooking surfaces with a light coating of cooking oil. Remove any excess
oil with a cloth or paper towel.
HOW TO USE YOUR AREPA MAKER
When the appliance is operating for the first time, there may be a slight burning odor, as the heating ele-
ments warm up. This represents no danger to the user and does not indicate a defect in the appliance.
Allow the appliance to heat up until the odor clears.
Working Temperature Range
°C
°F
160 - 210
320 - 410
•
Prepare the Arepa dough.
•
Make balls of dough, about 2 to 3 inches in diameter.
Note: Be sure that each ball is not larger than the cavity on each cooking plate.
•
Place appliance on a flat surface.
Caution: Because some countertop finishes are more sensitive than others, use care not to place the
appliance on surfaces where heat may cause damage.
•
Release the locking latch and lift the lid to open position.
•
Plug the appliance into a standard 120 Volt AC outlet.
•
The red-light indicator "POWER" will come on indicating that the unit is heating.
Caution: The temperature of accessible surfaces may be high when the appliance is operating.
•
The unit will pre-heat for about 5 minutes and once is ready to cook the green "READY" indicator
light will turn on.
•
Open the unit using an oven mitt to avoid burning by touching the hot surface.
6
Highest Temperature
°C
°F
230
446
AREPA MAKER/ ASADOR DE AREPAS
MANUAL DE INSTRUCCIONES