Naim Audio UNITILITE Manual Del Usuario página 2

Streamer Spotify
1. Intro duct ion
This supplement describes the configuration and use of the Spotify Connect function
incorporated in version 3.24 of the Naim streamer product family operating firmware. Spotify
Connect enables Spotify Premium users to play Spotify audio streams via a Naim streamer
under the control of a Spotify app running on a suitable mobile device.
Products included in the streamer family are: UnitiLite, UnitiQute, UnitiQute 2, NaimUniti,
NaimUniti 2, SuperUniti and NAC-N 172 XS, ND5 XS, NDX and NDS.
Units running firmware earlier than 3.24 do not incorporate the Spotify Connect function. For
information on updating streamer firmware contact your local Naim retailer or distributor, or
visit: www.naimaudio.com/updates.
Spotify Connect requires a Spotify Premium account. For more information on Spotify
Connect visit: www.spotify.com/connect
2. T h e S tre amer Spot if y Connect Fun ct i on
Note: Spotify Connect is not available in all countries. For a list of availability by country visit the
support pages at www.spotify.com/connect.
With its Spotify input enabled, a Naim streamer connected to the same local network as the device
running the Spotify app and in receipt of a Spotify stream will automatically select its Spotify input
and play the audio. The streamed audio programme will display on the streamer front panel and on
the Naim n-Stream app. Programme transport (play, pause, previous, next, stop) and volume can be
controlled using the streamer handset, the streamer front panel controls, the n-Stream app or the
Spotify app.
Note:
Once a streamer has been connected to the Spotify app over a common local network it will
become visible to the app and able to play Spotify streams with app control over the Internet.
3. Enabling T h e Spot if y In put
3.1 The Spotify Input
Before a streamer can play a Spotify stream its Spotify input must be enabled.
Streamers originally running firmware version 3.24 or later, and those that have been updated to 3.24
or later, will have their Spotify input enabled by default. If your streamer has its Spotify input enabled,
Section 3.2, however, if for any reason your streamer Spotify input has been disabled it can be
jump to
re-enabled by following the steps below:
• Enter setup mode by pressing the handset
• Use the handset navigation keys (
• Select Spotify-Disabled
Note: The Spotify input can be re-named once enabled.
Full Naim streamer product installation and operational information can be found in the appropriate
®
Connect Supplement
setup
(
5 , 6 , 3 , 4 and ok/list) to select
from the list of inputs and enable the input.
Reference Manual available at: www.naimaudio.com/support/manuals.
) key.
Inputs in the
Note: All Naim streamer
products can be updated to
firmware version 3.24, however
Spotify Connect can only be
enabled on those that are
also 24bit/192kHz capable.
24bit/192kHz capable streamers
are identified by displaying
3DXXXXX in the "BC SW" line
of their System Status screen
(Setup > Factory Settings >
System Status).
Streamers that display 1AXXXXX,
2AXXXXX or 2DXXXXX in the
BC SW line of their System
Status screen must be hardware
updated in order to enable
Spotify Connect with firmware
version 3.24. Contact your local
Naim retailer or distributor
for information on streamer
updates.
Note:
Visit www.spotify.
com/connect for the latest
information on available Spotify
Connect platforms.
Setup
Language
4 Inputs
Rooms
Speakers
Setup menu.
Inputs
USB
4 Spotify-Disabled
Front
Analogue
Spotify
4 Enabled:
Spotify
4 Enabled:
Name:
Input Trim:
English
2/11
7/13
1/1
No
1/3
Yes
Spotify
0