STEP 5
With your crib rail in the 'up' position push down on the locking tabs to secure
your crib rail in place.
NOTE: After locking both buckles, check to make sure that the mesh wall of
the crib rail is firmly up against the side of the mattress. There should be NO
GAPS. If the mesh wall is not firmly against the side of the mattress, check to
make sure the locking buckle is functioning properly and that the strap is not
twisted beneath the mattress. Once this has been checked and corrected if
needed, unlock the buckle and pull on the end of the strap tightly and lock the
buckle again.
Store the excess anchoring and strap material by tucking it under the mattress.
Do not cut excess strap, may cause strap to fray.
LOCKING TAB
English
11