X-Rite ColorMunki Display Guia De Inicio Rapido página 35

EN
Care, Support, & Service
Care
Keep the ambient diffuser in place over the optics when not in use. The ambient diffuser will prevent dust or dirt
from accumulating on the lens.
If cleaning is needed, first use a lens blower brush to remove loose dust. If necessary, wipe the lens gently with a
soft lint free cloth.
NOTE - Never use water, solvents, or detergents to clean the lens or body of the device, as these may cause damage
or deformation.
Always use and store the device between 10° C to 35° C at 20% to 80% relative humidity (non-condensing).
Service
Do not try to dismantle the ColorMunki for any reason. Unauthorized dismantling of the equipment will void all
warranty claims. Contact the X-Rite support or the nearest X-Rite Service Center, if you believe that the unit does not
work anymore or does not work correctly.
Service Center
Visit www.XRITE.com to locate the nearest X-Rite Service Center or contact your X-Rite dealer for more information.