Cleaning And Care - Klarstein BUBBLE BOOST Manual De Instrucciones

EN
20

CLEANING AND CARE

• Disconnect the device from the power supply. Observe the safety instructions.
• After you have drained the water from the washing drum, set the controller of the
pumps back to standard.
• Remove the lint filter and disassemble it by pressing on the floor from the inside.
Clean the fluff filter in warm water.
• After cleaning, reassemble the fluff filter and reinsert it. As soon as it sits properly,
you will hear a click.
• Disconnect the appliance from the water supply and attach the drain hose to the
appliance.
• Rub off the housing. Use only mild detergents.
• Close the cover and place the washing machine in a well-ventilated place.
Important cleaning instructions
• The electrical components of the device must not come into contact with water
during maintenance.
• If the mains cable is damaged, it must be replaced immediately by a specialist
workshop.