MaxWest MX-BUDS Manual Del Usuario página 5

3、Simple instructions
①Headphone on/off:
1. Turn on: Take out the headset from the charging
compartment, the headset will automatically turn on:
Or press and hold the touch points on both sides for 2 seconds
to turn on, and the prompt sound "Power on";
2. Shut down: Put it directly into the charging compartment to
shut down; or press and hold the touch point for 5 seconds to
shut down, the prompt sound "Power off". When the headset is
turned on and not connected to the mobile phone, it will
automatically turn off in 3 minutes.
②Matching:
1,Automatically pair after power-on, and the blue and red lights
flash in single ears after successful pairing.
(Note: If there is no pairing, the red and blue lights on both ears
flash alternately, and the headset is not turned on.
When the phone is connected, double-click the left or right ear,
and the blue light flashes slowly in any ears after the pairing is
successful. )
2,IOS&Android system connection headset:
Open the phone "settings"-open the Bluetooth search-find the
"MX-BUDS" pairing name and click to connect-the "connected"
binaural light goes out. When the phone is connected once, use
the first point of operation again, and the headset will
automatically connect with the phone。
5