Hardware Contents; Safety Information - Apex Garden GF-19S067B Instrucciones De Montaje

HARDWARE CONTENTS

AA
Qty: 4
Bolt M6 x 30mm

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or install the product.
• Two to four people are needed for assembly.
WARNING:
• KEEP ALL FLAME AND HEAT AWAY FROM THIS TENT FABRIC.
•
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous
contact with any flame source. The application of any foreign substance to the tent fabric may
render the flame-resistant properties ineffective.
CAUTION
• Do not leave outside during high winds, heavy rains or snow. If high winds, heavy rains or snow occurs,
remove canopy and mosquito net, clear snow load from roof tube, and check for damage before
continued use.
• Fasten the base to the deck (wood or concrete) for item stability.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 1 hour
INSTALLATION INSTRUCTIONS
1.Insert the Left Up Screen(A) to Left Down Screen(B).
· Insert the Right Up Screen(C) to
Right Down Screen(D).
Be careful not to pinch fingers!
· Assemble the Left Screen(A&B) to
Right Screen(C&D) by using
Bolt(BB) and Nut(CC).
Hardware Used
Bolt M6 x 45mm
BB
Nut
CC
BB
Qty: 28
Bolt M6 x 45mm
1
x 12
x 12
4
CC
Qty: 32
Nut
C
D