ASROCK B560 Pro4 Manual De Instrucciones página 38

2.11 M.2_SSD (NGFF) Module Installation Guide (M2_3)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket
(M2_3) supportsM Key type 2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI
Express module up to Gen3 x2 (16 Gb/s).
* If M2_3 is occupied by a SATA-type M.2 device, SATA3_1 will be disabled.
Installing the M.2_SSD (NGFF) Module
B A
No.
Nut Location
PCB Length
Module Type
34
2
1
1 2
A B
8cm 11cm
Type2280 Type 22110
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type
and length of your M.2_SSD
(NGFF) module, find the
corresponding nut location to
be used.