Kenwood KAC-9152D Manual De Instrucciones página 4

Connection
2WARNING
To prevent fire caused by a short in the wiring,
connect a fusible link or breaker nearby the
battery's positive terminal.
2CAUTION
• If sound is not output normally, immediately
turn power off and check connections.
• Be sure to turn the power off before changing
the setting of any switch.
• If the fuse blows, check wires for shorts, then
replace the fuse with one of the same rating.
• Check that no unconnected wires or
connectors are touching the car body. Do
not remove caps from unconnected wires or
connectors to prevent short circuits.
• Connect the speaker wires to appropriate
speaker connectors separately. Sharing the
negative wire of the speaker or grounding
speaker wires to the metal body of the car can
cause this unit to fail.
• After installation, check that the brake lamps,
winkers, and wipers work properly.
NOTE
• Do not connect cables and leads to both RCA
cable input jacks and the speaker level input
terminals simultaneously, for this may cause
malfunction or damage.
* Commercially available parts
2CAUTION
• Before connecting the remote controller
cables, always set the Bass boost level control
to "0dB".
4 English
■ RCA cable or Speaker level input connection
• RCA cable Connections
• Speaker level input Connections
Cable Color of the connector
9 White
Left
· White/Black
9 Gray
Right
· Gray/Black
■ Power wire and Speaker wire connection
Terminal cover
Battery wire*
Protective Fuse*
Ground wire*
Battery
■ Remote cable connection (KAC-9152D/8152D only)
CENTER UNIT
(CD receiver, etc.)
RCA cable ground terminal
Genuine-accessory car
stereo (No line output
center unit etc.)
Power control wire
Power control wire
RCA cable*
Left input
Right input
Car fuse box
Battery
Lead terminal*
Subwoofer (L + R)
Remote cable
Remote controller
ACC