DeWalt DW866 Manual De Instrucciones página 10

384621-01/DW866 1/8/02 2:27 PM
TO REMOVE BRUSHES:
1. TURN OFF TOOL AND DISCONNECT FROM POWER SUPPLY.
2. Remove brush cap.
3. Pull brush assembly out of brass insert.
Motor Brushes
D WALT uses an advanced brush system which automatically stops
E
the drill when the brushes wear out. This prevents serious damage to
the motor.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid.
Self-lubricating bearings are used in the tool and periodic
relubrication is not required. In the unlikely event that service is ever
needed, take your tool to an authorized service location.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO
OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH WHICH IT
IS BEING USED.
If you need assistance in locating any accessory, please contact
D WALT Industrial Tool Company, 626 Hanover Pike, P.O. Box 158,
E
Hampstead, MD 21074 or call 1-800-4-D
CAUTION: The use of any non-recommended accessory may be
hazardous.
Page 7
WALT (1-800-732-4441).
E
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
7
WALT tools are covered by our: