QSC QM-SW Manual De Instrucciones página 2

Installation and Use
Step 1. Locate mounting area where the
loudspeaker will be installed. It must be a
structurally sound area with adequate
strength to support at least five times the
weight of the loudspeaker.
Using the bracket as a template with the
narrow end pointing up, mark the selected
hardware locations onto the mounting
surface. Select and install the appropriate
mounting hardware (not included). If you
are not sure about the correct hardware
for the mounting surface, consult a profes-
sional engineer. Ensure the bracket is se-
cured to the mounting surface before
attaching the loudspeaker.
Mounting
Surface
QM-SW
Bracket
Dimensions QM-SW
Step 2. Lower the loudspeaker onto the
bracket making sure the slot on the loud-
speaker's bracket fully engages the wall
bracket. Verify correct mounting before in-
stalling the retaining bolts.
Note! Open end of wall bracket
is to be on the bottom when
mounted. Bracket will not func-
tion if installed otherwise.
Structural supporting material.
Top
Step 3. Install the two retaining bolts
and tighten them securely.
Dimensions QM-BW
Top