System Controls On Vision Sensor; Eyewatch Control Panel; Mode Selection - Mobileye 6 Serie Manual Del Usuario

System Controls on Vision Sensor

Turning the Mobileye 6-Series system OFF/ON
Press and hold the center button on the vision sensor (o).
Volume Control
Press the (–) button repeatedly to decrease the volume; press the (+) button repeatedly to increase the volume.
There are six volume levels (0-5). Note: When the volume is set to zero (Mute), the audible alerts for LDW and HMW
are disabled. However, the audible alert for FCW, UFCW and PCW will default to level "3. "

EyeWatch Control Panel

Use the ( , +, -) buttons on the EyeWatch to navigate through the system menu.
NOTE:
Please note that the EyeWatch menu button is disabled when the vehicle is moving. This
is for safety reasons in order to prevent the driver from changing the system settings while
driving. The volume settings, however, are enabled regardless of the vehicle's speed.

MODE SELECTION

Turning the Mobileye 6-Series system OFF/ON
Turning OFF: Press the (
Turning ON: Press any button.
BRIGHTNESS LEVEL CONTROL
The EyeWatch display is equipped with a light sensor that will automatically adjust the
brightness according to light conditions, including day or night.
Changing the Brightness Level:
a. Press (
b. Press (
c. Press the (–) (+) buttons to decrease or increase the brightness level.
d. Press the (
There are five available levels (1–5).
14
) button until the EyeWatch display turns off.
) once. The Brightness Icon will appear.
) again. The Brightness Level Icon will appear.
) again to exit and save new settings (or wait five seconds).